CKZVK - A N SPRAY STENCIL INK ALL COLORS
- MSDS: CKZVK
- Manufacturer: MARSH STENCIL MACHINE CO
- Product Name: A N SPRAY STENCIL INK ALL COLORS
- National Stock Number: 7510-00-224-6734
Product Identification
Product ID:A N SPRAY STENCIL INK ALL COLORS
MSDS Date:08/14/1989
FSC:7510
NIIN:00-224-6734
Status Code:A
MSDS Number: CKZVK
Responsible Party
BELLEVILLE, IL 62222
US
Emergency Phone: 0000000000
Info Phone: 618-234-1122
Cage: 38512
Contractor
Telephone: 618-234-1122
Cage: 38512
Ingredients
METHYLENE CHLORIDE
CAS: 75-09-2
RTECS: PA8050000
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPANE/ ISOBUTANE
CAS: 74-98-6
RTECS: TX2275000
ACGIH TLV: 900 PPM
TOLUOL
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
ACGIH TLV: 434 MG/M3;100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:POSSIABLE HUMAN CARCINOGEN, CLASS 28.
VAPOR EXPOSURE MAY CAUSE ANESTHETIC OR NARCOTIC EFFECTS, DIZZINESS,
DRUNKENNESS, RESPIRATORY IRRITATION, CARDIAC ARRTHMIAS, BLOOD
EFFETS, CENTRAL NERVOUS SYSTEM E FFECTS, LIVER AND KIDNEY EFFECTS
OR UNCONSOOUSNESS. VAPOR MAY IRRITATE EYES. LIQUIS MAY CAUSE PAIN,
MODERATE EYE IRRITATION AND SLIGHT CORNEAL INJURY. PROLONGED SKIN
CONTACT CAN CAUSE IRRITATION AND D EFATTING OF SKIN.
Medical Cond Aggravated by Exposure:
First Aid
First Aid:EYE: FLUSH WITH WATER FOR 15 MINITUES AND GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING; WASH WITH SOAP AND
WATER. INHALATION: REMOVE TO FRESH AIR, IF DISCOMFORT PERSISTS, GET
MEDICAL ATTE NTION. INGESTION: DO NOT INDUCE VOMITING. CALL
PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:=-104.4C, -156.F
-156
Lower Limits:1.0
Upper Limits:19.1
Extinguishing Media:WATER FOG, CARBON DIOXIDE
Fire Fighting Procedures:NONE KNOWN
Unusual Fire/Explosion Hazard:EXPOISURES TO HEAT ABOVE 120F MAY CAUSE
CANS TO EXPLODE RELEASING THE HIGHLY FLAMMABLE PROPELLANT.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WHEN AIRBORNE
LEVELS MAY EXCEED PEL.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFTEY GOGGLES
Other Protective Equipment:AS NECESSARY TO AVOID PROLONGED CONTACT.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=-41.5C, -43.F
B.P. Text:-43
Vapor Pres:55
Vapor Density:HEAVIER
Spec Gravity:.60
Evaporation Rate & Reference:FASTER BUTYL ACETATE=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VARIOUS COLORS WITH CHLORINATED HYDROCARBON ODOR
Percent Volatiles by Volume:65-95
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS AND POWERED ALKALI METALS
Stability Condition to Avoid:TEMPATURES ABOVE 120F, SOURCES OF HEAT OR
IGNITION
Hazardous Decomposition Products:CARBON MONOXIDE, HYDROGEN CHLORIDE,
TRACES OF PHOSGENE
Conditions to Avoid Polymerization:AVOID EXPOSURE TO HEAT AND FLAME
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.